Siirry pääsisältöön
FI FIsuomi

Xinje Plc Usb — Driver Install

Q: Does XINJE provide a USB driver for Linux or macOS? A: Officially, no. XINJE AutoShop is Windows-only. However, Linux users can sometimes get the USB-to-serial bridge (using the ch341 or ftdi_sio kernel module) to create a COM port, but you cannot run AutoShop without a virtual machine.

Q: My XINJE PLC has an Ethernet port – do I still need USB? A: For firmware updates and initial IP address setting, USB is often required. Once the PLC has an IP, you can use Ethernet for programming, but USB remains the fallback when network config fails.

Q: Can I install the driver without administrator rights? A: No. Device driver installation requires writing to C:\Windows\System32\drivers, which is protected. Contact your IT department for temporary admin credentials. xinje plc usb driver install

Q: Why does my USB driver work on Windows 7 but not Windows 11? A: Windows 11 has stricter memory integrity (HVCI) and driver requirements. Disable Memory Integrity under Windows Security > Device Security > Core Isolation before installing.

If you’ve just unboxed a Xinje PLC (like the popular XC or XCP series), plugged it into your PC via USB, and were met with a frustrating "Device not recognized" message—you aren't alone. Q: Does XINJE provide a USB driver for Linux or macOS

One of the most common hurdles when working with automation hardware from non-Western manufacturers is the driver setup. Unlike plug-and-play devices, industrial controllers often require specific drivers to communicate with programming software like Xinje’s XD/XC Pro.

In this guide, we’ll walk through the Xinje PLC USB driver installation process, troubleshooting the "Port not found" error, and getting your hardware online. If you’ve just unboxed a Xinje PLC (like

Critical Warning: Installing the wrong driver for your series can cause Blue Screen of Death (BSOD) or prevent the programming software from seeing the PLC.

  • After success, the device appears under “Xinje USB Devices” (not COM & LPT).

    • If Windows fails to find the driver automatically, you will need to point it to the files manually.

  • Click Next. Windows will scan the folder, find the .inf or .sys files, and install the driver.

    • Alternative Source: If you cannot find the driver folder on your PC, you can download the "USB Driver for