V380 Firmware -

Cause: The firmware reset the Wi-Fi region or channel. Fix: Perform a hardware reset: Press and hold the reset button (pinhole) for 20 seconds while powered on. Then re-add the camera.

If the app doesn't show details, unscrew the camera base (carefully). Look for a PCB number like:

Write this down. It is your key to finding the correct firmware. v380 firmware

Open the V380 Pro app > Device Settings > Device Information. Look for:

Cause: The bootloader is ignoring the SD card. Fix: Try a different card (some V380 cameras are picky with SDHC vs SDXC). Also, try naming the file tmp_udp.bin. Cause: The firmware reset the Wi-Fi region or channel

In 2022, several vulnerabilities were discovered in older V380 firmware versions (CVEs related to hardcoded credentials and unencrypted P2P streams). Hackers could potentially access your camera feed. Newer firmware closes these backdoors.

Firmware is the permanent software programmed into the camera’s read-only memory. It controls the hardware’s basic functions, including: Write this down

The term "V380" refers to a reference design developed by Novatek or similar Chinese chip manufacturers. Many factories produce variants of this design, which means there is no single universal firmware. Installing the wrong version is the leading cause of "bricked" cameras.

Cause: The new firmware has incorrect GPIO pins for the IR filter. Fix: Downgrade to your previous version. Keep multiple firmware backups.

Before downloading anything, you must identify your exact hardware. Do not rely solely on the camera's sticker.

An Important Update Regarding Ads

Cause: The firmware reset the Wi-Fi region or channel. Fix: Perform a hardware reset: Press and hold the reset button (pinhole) for 20 seconds while powered on. Then re-add the camera.

If the app doesn't show details, unscrew the camera base (carefully). Look for a PCB number like:

Write this down. It is your key to finding the correct firmware.

Open the V380 Pro app > Device Settings > Device Information. Look for:

Cause: The bootloader is ignoring the SD card. Fix: Try a different card (some V380 cameras are picky with SDHC vs SDXC). Also, try naming the file tmp_udp.bin.

In 2022, several vulnerabilities were discovered in older V380 firmware versions (CVEs related to hardcoded credentials and unencrypted P2P streams). Hackers could potentially access your camera feed. Newer firmware closes these backdoors.

Firmware is the permanent software programmed into the camera’s read-only memory. It controls the hardware’s basic functions, including:

The term "V380" refers to a reference design developed by Novatek or similar Chinese chip manufacturers. Many factories produce variants of this design, which means there is no single universal firmware. Installing the wrong version is the leading cause of "bricked" cameras.

Cause: The new firmware has incorrect GPIO pins for the IR filter. Fix: Downgrade to your previous version. Keep multiple firmware backups.

Before downloading anything, you must identify your exact hardware. Do not rely solely on the camera's sticker.