Nokia 108 Rm 961 Imei Change Code New

If your IMEI shows up correctly when you dial *#06#, but you still have no service, the problem is not the IMEI. The problem is likely:

(Note: This process requires technical knowledge. Proceed at your own risk.)

Once the process is complete, disconnect the phone, insert a SIM card, and power it on. Your network signal should return.

This is the closest thing to a "code." You do not type it on the keypad; you send it via a computer.

The Catch: On the Nokia 108 RM-961, the AT+EGMR command is often password locked by Nokia’s bootloader. You cannot execute it without a specific "SBOOT" bypass. nokia 108 rm 961 imei change code new

Before diving into IMEI hacking, let's understand the hardware. The Nokia 108 (RM-961) runs on the Nokia Series 30+ operating system. It is not a smartphone; it has no Android or Linux kernel in the traditional sense. It uses a MediaTek MT6260D processor.

Specs quick view:

Why does the chipset matter? Because IMEI change methods depend entirely on the processor. The MT6260D is a "feature phone processor" that uses proprietary AT commands via a serial interface.

Many users remember the old days of Nokia feature phones (like the Nokia 1200, 1600, or 1280) where you could simply type a code into the dialer to rewrite the IMEI. People often search for similar "magic codes" for the Nokia 108. If your IMEI shows up correctly when you

Common search terms include:

If you search YouTube or Telegram, you will find channels claiming that typing a code like *#*#3646633#*#* or *#7465625# into the Nokia 108 dialer will open a "Nokia 108 RM 961 IMEI change code new" menu.

Here is the technical truth: The Nokia 108 RM-961 does not have an engineering menu accessible via USSD codes.

Why? Because the Series 30+ OS locks out those dialer codes. On older Nokia phones (like the 3310 or 1110), you could use *#92702689#. On the 108, that code does nothing. (Note: This process requires technical knowledge

The only way to change or repair the IMEI on an RM-961 is via hardware flashing tools or AT commands sent through a USB cable (FBUS) .

This is the most common legitimate technical issue. After a failed firmware flash or hardware drop, the Nokia 108 can lose its IMEI data. The phone will show "IMEI: 0" or "Invalid IMEI." In this case, the user needs to restore the original IMEI (which is legal) - but they often search for "change" instead of "repair."

Short Answer: No.

The Nokia 108 (RM-961) is built on a different hardware architecture compared to the older Symbian or Nokia OS phones. While some older MediaTek (MTK) devices allowed access to Engineering Mode (*#*#3646633#*#* or similar) to write IMEI, the Nokia 108 firmware restricts this access.

Even if you manage to access the Engineering Mode menu using a code, the option to write or change the IMEI is usually disabled or hidden by Nokia to prevent theft and fraud. Typing a random string of numbers will not change your IMEI; it will likely just give you an error message or do nothing at all.