Mt6769z Scatter File

Example mt6769z_scatter.txt:

[HEADER]
file_format = 1.0
[PARTITION]
partition_name  =  PRELOADER
partition_offset =  0x00000000
partition_size   =  0x00010000
partition_name  =  BOOTLOADER
partition_offset =  0x00010000
partition_size   =  0x00020000
partition_name  =  BOOT
partition_offset =  0x10000000
partition_size   =  0x00800000
...
[LOADER]
loader_version =  1.0

Do NOT use scatter files from different models, different board IDs, or untrusted sources. mt6769z scatter file

When you open the MT6769Z_Android_scatter.txt in a text editor (like Notepad++ or Sublime Text), you won't see binary gibberish. Instead, you'll see structured data. Here is a breakdown of a typical section: Example mt6769z_scatter

- partition_index: SYS0
  partition_name: preloader
  file_name: preloader_mt6769z.bin
  is_download: true
  type: SV5_BL_BIN
  linear_start_addr: 0x0
  physical_start_addr: 0x0
  partition_size: 0x400000
  region: EMMC_BOOT_1

| Error Code | Message | Solution | | :--- | :--- | :--- | | STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) | DA didn't send | Reinstall MTK USB drivers. Use USB 2.0 port. | | STATUS_ERR (0xC0010001) | S_DL_GET_DRAM_SETTINGS_FAIL | Scatter file mismatch. You loaded an MT6765 scatter on an MT6769Z. Get the correct file. | | STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012) | Auth file required | Newer MT6769Z devices (Android 12+) need an auth_sv5.auth file. Use SP Flash Tool with DA (Download Agent) from the firmware folder. | | Error: Status_Size_Too_Large | Partition too large | You tried to flash a super.img bigger than the super partition size defined in scatter. Repartitioning required (advanced). | Do NOT use scatter files from different models,