Summarize the key points made about MIMK-082 and reflect on its overall importance or relevance.
Please provide more details so I can tailor the write-up to your specific needs. MIMK-082
| Q | A | |---|---| | Can I operate the MIMK‑082 without a PC? | Yes. Use the front‑panel controls to select “Local Logging” or “Stand‑by”. Data can be retrieved later via the SD card or USB. | | What is the maximum cable length for Ethernet? | Up to 100 m for Cat‑5e/6, provided the network switches support the required bandwidth. | | Is the device compatible with Linux? | The driver is available for kernel 5.x and newer. Installation instructions are in the “Linux_Readme.txt” on the CD. | | How do I reset the unit to factory defaults? | Hold the Reset button (inside the rear panel) for 5 seconds while powered on. | | *Can I chain multiple MIMK‑082 Summarize the key points made about MIMK-082 and
| Parameter | Value | Units | |-----------|-------|-------| | Power supply | 100‑240 V AC, 50/60 Hz | — | | Input current | ≤ 0.5 A | A | | Operating temperature | 0 – 40 | °C | | Storage temperature | –20 – 70 | °C | | Communication interfaces | USB‑C, Ethernet (10/100 Mbps), optional RS‑485 | — | | Resolution | [e.g., 0.01 °C, 1 mV] | — | | Accuracy | [e.g., ±0.1 % of reading] | — | | Dimensions (W × H × D) | [e.g., 120 mm × 80 mm × 30 mm] | mm | | Weight | [e.g., 250 g] | g | | Compliance | CE, FCC, RoHS | — | Note: The exact mounting method varies by application
(Replace the placeholders with the actual data sheet values.)
Note: The exact mounting method varies by application. Follow the section that matches your environment.