SUPER HEROINE ACTION Special Manufacture, ZEN Pictures.
mBlock 3.4.12 was built on the Adobe Air framework, utilizing the source code of Scratch 2.0.
mBlock 3.4.12 is incredibly light. It runs on a Pentium 4 with 1GB of RAM. Modern versions are Electron apps (web browsers in a box) that eat 500MB+ of RAM. If you are running a computer lab with donated, old hardware, 3.4.12 runs like a dream while mBlock 5 crashes constantly.
When [Green flag] clicked
Forever
If <(Line sensor Left) = [1]> then // 1 usually means black
Turn left (Speed 150)
Else
If <(Line sensor Right) = [1]> then
Turn right (Speed 150)
Else
Go forward (Speed 200)
End
End
End
Why this works better in 3.4.12: In mBlock 5, the "Forever" loop has latency due to the software interpreting Python in the background. In 3.4.12 (Upload mode), this loop runs at the microcontroller’s clock speed (16MHz). The response is instant.
The installer includes an "Arduino Drivers" checkbox. Do not skip this. Even if you think you have drivers, check it. This installs the CH340 and FTDI drivers required for clone boards.
1. Rock-Solid Stability for Arduino Uploading Later versions of mBlock (4 and 5) often struggle with serial port connections or require complex firmware updates. Version 3.4.12 is brutally simple: you select the port, you click "Upload," and it works. It rarely crashes mid-upload, which is a blessing in a classroom of 30 students.
2. True Offline Functionality Unlike modern web-based IDEs, mBlock 3.4.12 runs entirely offline. No login walls, no "your school blocked this domain," no waiting for assets to load. Double-click the .exe or .app, and you are programming.
3. Excellent Hardware Library The built-in blocks for sensors (ultrasonic, line-follower, temperature, potentiometer) and actuators (servos, DC motors, RGB LEDs) are comprehensive. You can control an LED on pin 13 with the same ease as moving a cat sprite.
4. The "Upload" vs. "Live" Modes This version excels at two workflows:
5. Low System Requirements You can run this on a 10-year-old Windows 7 laptop with 2GB of RAM. It is incredibly light.
As a legacy app, you will encounter hurdles. Here are the fixes for the top three complaints.
One of the lost arts of mBlock 3.4.12 is the "Extensions" folder. Because the software is open-source adjacent (based on Scratch), you can write custom JavaScript or C++ extensions.
Appendix: Quick Reference – Common mBlock 3.4.12 Shortcuts
mBlock 3.4.12 is an older version of the graphical programming software, which was primarily used for programming robots and Arduino-compatible boards. It is important to note that mBlock 3.4.12 does not have a built-in "Report" generator
or a dedicated "Make a Report" button. If you need to create a project report for a class or competition, you should follow these manual steps: How to Create a Project Report for mBlock 3.4.12 Capture the Blocks
: Since version 3.4.12 is a desktop application, you can use a screenshot tool (like the Snipping Tool on Windows or Shift+Command+4 on Mac) to capture your block code. Export the Arduino Code
: If you are in "Arduino Mode," you can see the C++ code on the right-hand side. Copy this text into a document to show the professional code version of your project. Documentation Structure : A standard mBlock project report typically includes: Project Title : The name of your robot or game. Hardware Used
: List items like the mCore board, ultrasonic sensor, or line follower. Code Images : Screenshots of your main loops and events. Logic Explanation
: A brief text description of how your "If-Then" blocks work. Result/Video : A link or photo showing the project working in real life. Important Version Updates
If you are looking for more advanced features like "Publishing" or cloud sharing, consider using the web version or the newer mblock 3.4.12
, which includes better integrated sharing and project documentation tools. Logic Breakdown for the code you have built? Download Page – mBlock
Tailored for coding education and supporting offline editing on PC devices. Support Windows/Mac/Linux/Chromebook. How to connect Ranger with mBlock 3 - Makeblock
It might be the line follower faulty or other hardware issues. Please follow below steps to test the line follower module. Step 1: mBlock: Free Coding Software - Makeblock
The quote "mblock 3.4.12": put together a feature is not a standard programming command or a known error.
If you are trying to write code or access a specific function in mBlock 3.4.12 on Home Tutoring, it appears you might be translating a concept or misremembering a block name. Because mBlock is based on Scratch, you "put together" features by snapping visual blocks together.
Below is a guide on how to actually create or "put together" a custom feature (function) in mBlock 3.4.12. 🛠️ Creating a Custom Feature (Block) in mBlock 3.4.12
To create your own custom feature or function in this specific version of the software, you need to use the "Make a Block" tool. Open the block palette
Navigate to the Data & Blocks category in the center column. Initialize your new feature Click on the Make a Block button. Name your feature
Type a descriptive name for the function you want to put together. Add inputs (Optional)
Click the options to add number, string, or boolean inputs if your feature needs specific data to run. Define the behavior
Click OK. A new hat block starting with define [Your Block Name] will appear on your canvas. Snap the logic together
Drag and drop standard command blocks underneath this definition to build your custom feature.
Could you clarify if you are trying to write custom Arduino code, or if this quote came from a specific tutorial step you are trying to follow? Arduino Block Coding - Home Tutoring
mBlock 3.4.12: The Essential Guide to This Legacy Coding Powerhouse
mBlock 3.4.12 is a graphical programming environment based on Scratch 2.0 open-source code, designed to help beginners and students learn the logic of programming through a visual, block-based interface. While newer versions like mBlock 5 exist, version 3.4.12 remains a critical tool for educators and makers who require a stable, legacy environment for specific hardware like mBot and Arduino. 1. Key Features of mBlock 3.4.12
This specific version is favored for its simplicity and direct hardware integration:
Block-Based Coding: Uses a "drag-and-drop" system that eliminates the need to memorize complex syntax, making it accessible for all ages.
Hardware Support: Initially built for Makeblock robot kits (like mBot), it also seamlessly supports Arduino boards (Uno, Leonardo, Nano, Mega 2560) and third-party projects like Pinoo. mBlock 3
Real-Time Preview: Allows users to observe the physical reactions of their robots or hardware immediately after writing their code.
Transition to C++: For advanced learners, the software can translate visual blocks into Arduino C code, providing a bridge to professional programming. 2. Why Version 3.4.12 Specifically?
While mBlock has transitioned to the Scratch 3.0-based mBlock 5, version 3.4.12 is often cited as one of the final "stable" revisions of the 3.x family.
Stability: It is highly optimized for older PCs and specific educational kits that may not be fully compatible with the newer web-based architecture of mBlock 5.
Pinoo & Custom Kits: Specialized robotics kits like Pinoo specifically recommend version 3.4.12 for its ease of use in teaching algorithm logic. 3. System Requirements & Compatibility
One of the greatest strengths of mBlock 3.4.12 is its low overhead, making it ideal for classroom settings with older hardware: Operating Systems: Fully compatible with Windows and macOS.
Hardware Requirements: Requires minimal RAM (typically 1GB+) and works on most standard educational computers.
Connectivity: Connects to robots via a standard USB cable or Bluetooth for live interaction. 4. Comparison: mBlock 3 vs. mBlock 5 mBlock: Free Coding Software - Makeblock
mBlock 3.4.12 is a legacy but highly stable version of the graphical programming environment developed by Makeblock. Based on the Scratch 2.0 open-source code, it is designed to bridge the gap between simple block-based coding and real-world hardware interaction. Key Features of Version 3.4.12
Block-Based Logic: Uses a "jigsaw" drag-and-drop system, making it accessible for learners from a very young age without requiring prior knowledge of programming languages. Dual Coding Modes:
Scratch Mode: Allows the hardware (like an Arduino or mBot) to interact directly with the computer in real-time to create games or interactive animations.
Arduino Mode: Converts your block scripts into C++ code, which can then be uploaded directly to the hardware for offline, standalone operation.
Broad Compatibility: While primarily for Makeblock kits like mBot, it also supports a wide range of third-party Arduino-based boards and Pinoo projects.
Extension Support: Users and educators can create or add custom extensions to include new sensors and actuators not found in the standard library. Why Still Use 3.4.12?
While mBlock 5 (based on Scratch 3.0) is the newer standard, many educators prefer 3.4.12 for specific reasons:
Lower System Requirements: It often runs more smoothly on older school computers compared to the newer, more resource-intensive versions.
Direct Hardware Connection: It provides a very direct experience for updating firmware and managing serial port connections without the need for additional bridge software like mLink.
Stability: It is considered a "stable" release that avoids the frequent updates and potential UI changes found in active development versions. Essential Tips for Success Download Page – mBlock When [Green flag] clicked Forever If <(Line sensor
mBlock 3.4.12 is a legacy version of the Makeblock coding platform, specifically designed for desktop environments (Windows and macOS) to program hardware like mBot, mBot Ranger, and Arduino. It is based on Scratch 2.0, making it a familiar graphical interface for beginners. 1. Installation and Setup
Download: Ensure you have downloaded the installer for mBlock v3.4.12 from the Makeblock archive or Pinoo Robotics.
Drivers: If using Windows, you must install the Arduino driver to allow your computer to communicate with the robot. This is usually found under the Connect menu in the software.
Board Selection: Go to the Boards menu and select the specific hardware you are using (e.g., mBot (mCore), mBot Ranger (Me Auriga), or Arduino Uno). 2. Connecting Hardware To start programming your physical device:
USB Connection: Connect your robot to the PC via a USB cable and turn it on.
Serial Port: In mBlock, click Connect > Serial Port. Select the corresponding COM port (Windows) or /tty.usbserial... (Mac).
Firmware Upgrade: For "Online Mode" (running code directly by clicking the green flag), you must first go to Connect > Upgrade Firmware. This clears pre-loaded programs and prepares the board for live interaction. 3. Programming Modes mBlock 3 supports two primary ways of running your code: mBlock - One-Stop Coding Platform for Teaching and Learning
mBlock 3.4.12 is a classic, Scratch 2.0-based version of the coding platform primarily used for programming Makeblock robots like the mBot and various Arduino boards. 1. Interface Basics The layout is divided into three main sections:
Stage (Top Left): Displays animations or sensor data visuals.
Blocks Palette (Middle): Contains color-coded command blocks (e.g., Motion, Looks, Robots, Operators).
Script Area (Right): Where you drag and drop blocks to build your program. 2. Connecting Your Hardware To control a physical robot or Arduino:
Select Board: Go to the Boards menu and select your hardware (e.g., mBot, Arduino Uno).
Select Port: Click Connect > Serial Port and choose the COM port associated with your device.
Install Drivers: If your computer doesn't recognize the device, go to Connect > Install Arduino Driver. 3. Two Ways to Run Code
Live Mode (Interactive): Keep the USB cable connected. Use a "When [Green Flag] Clicked" block. This allows the robot to interact with the Stage in real-time.
Offline Mode (Upload): Start your script with an mBot Program or Arduino Program cap block. Right-click the top block and select Upload to Arduino to run the code autonomously without a computer. 4. Essential Block Categories
Robots: Specific commands for motors, LEDs, and sensors (ultrasonic, line follower). Operators: Used for math ( −negative ÷divided by ) and logic (And, Or, Not).
Data & Blocks: Where you create variables to store sensor values or scores. 5. Troubleshooting Tips
Firmware Update: If the robot isn't responding as expected in Live Mode, go to Connect > Upgrade Firmware.
Reset Default Program: Use Connect > Reset Default Program to restore the robot's original factory settings (like remote control mode). Unlock Creativity : Easy Arduino Programming with mBlock!