Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 May 2026
The HPE Smart Array S100i SR Gen10 is fully supported on Windows Server 2022, but it requires a specific deployment workflow compared to hardware RAID controllers. The use of HPE Intelligent Provisioning is the most reliable method for ensuring driver compatibility and system stability. System administrators should avoid "naked" installs of Windows Server 2022 without first preparing the S100i driver package, as the default Windows media does not include the necessary HPE proprietary drivers for this software-defined storage controller.
References:
The official driver for the HPE Smart Array S100i SR Gen10 SW RAID
on Windows Server 2022 is version 1010.14.0.0(C), released by HPE on September 28, 2022. Driver Details Version: 1010.14.0.0(C) Release Date: September 28, 2022
File Name: Typically provided as an executable (e.g., cp052316.exe) which must be extracted for manual installation.
Official Download: HPE Support Center - S100i Driver for Windows Server 2022. Installation Methods
The S100i driver is not included in standard Windows Server 2022 installation media. Use one of these methods to ensure your drives are recognized:
Intelligent Provisioning (Recommended): Use the assisted installation option in HPE Intelligent Provisioning. This automatically injects the required drivers during the OS setup. Manual Injection:
Download the driver and run the .exe on a separate PC to extract the files to a USB drive.
During the Windows "Where do you want to install Windows?" screen, click Load Driver and point to the folder on your USB drive.
iLO Remote Console: You can mount the driver folder as a virtual USB key using the HTML5 Remote Console in iLO for easier access during remote installs. Critical Technical Notes UEFI Only: The
requires the server to be in UEFI Boot Mode. It does not support Legacy BIOS mode.
SATA Only: This controller only supports SATA drives (up to 14 lanes) and basic RAID levels 0, 1, 5, and 10.
Performance: As a software-based RAID solution, it relies on the Windows driver to manage the array. Performance is generally lower than dedicated hardware RAID controllers (like the P-class Smart Array) and may not scale with high-end CPU upgrades.
Gen10 Plus Warning: If you are using a Gen10 Plus server, you likely need the SR100i Gen10 Plus driver instead, which is version 1010.124.100.1005.
HPE Smart Array S100i SR Gen10 entry-level, software-based RAID
solution integrated into many HPE ProLiant Gen10 servers. While it provides basic data redundancy, it is widely criticized for poor performance in write-intensive workloads. Spiceworks Community Quick Verdict
Low-budget, light workloads (e.g., OS boot volumes) where redundancy is needed but performance is not critical. Worst For:
Databases, heavy file servers, or high-performance VMs, especially in RAID 5 configurations. Windows Server 2022 Support: Fully supported via official HPE drivers. HPE Support Center Review Breakdown 1. Performance & Reliability Write Bottlenecks:
Users frequently report significant performance drops, specifically in RAID 5. Sequential write speeds can drop from 150MB/s to as low as once the system's cache is exhausted. CPU Dependency:
Because it is "Software RAID," parity calculations (for RAID 5/10) are handled by the system CPU. However, real-world tests show that upgrading to a more powerful CPU does not necessarily solve the underlying throughput limits of the S100i architecture. Stability:
Despite performance issues, its reliability for drive failures is solid. It accurately reports failed drives and handles rebuilds without data loss. Hewlett Packard Enterprise Community 2. Driver & Installation (Windows Server 2022) Manual Injection Required: The driver is not included
in standard Microsoft Windows installation media. If you are installing the OS onto a RAID volume, you must manually load the driver via USB or use HPE Intelligent Provisioning during setup. Official Downloads: HPE Smart Array S100i Driver (Win Server 2022) - Version 1010.14.0.0(C). HPE SR100i Gen10 Plus Driver - Specifically for Gen10 Plus platforms. HPE Support Center 3. Pros and Cons
The HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2022
is a critical software component that enables RAID functionality on entry-level HPE ProLiant Gen10 servers. Because the S100i is a software-based RAID (SW RAID) solution, it relies on this specific driver to manage disk arrays directly through the operating system rather than a dedicated hardware chip. Key Specifications & Capabilities S100i SR Gen10
is an ideal entry-level storage solution for non-critical workloads, offering the following features: RAID Levels Supported: 0, 1, 5, and 10.
Storage Interface: 6Gb/s SATA technology with up to 14 SATA lanes.
Drive Support: Compatible with both hot-plug and non-hot-plug SATA drives (HDD and SSD).
Boot Mode: Operates strictly in UEFI Boot Mode; Legacy Boot is not supported.
OS Compatibility: Full support for Microsoft Windows Server 2016, 2019, and 2022. Driver Download for Windows Server 2022 The HPE Smart Array S100i SR Gen10 is
The official driver for Windows Server 2022 is version 1010.14.0.0(C) (or newer), released by HPE in late 2022. Official Source: Download the HPE Smart Array S100i SR Gen10 SW RAID Driver from the HPE Support Center
Alternative for Gen10 Plus: If you are using a Gen10 Plus server, you may require the HPE Smart Storage SR100i Gen10 Plus SW RAID Driver instead. Installation Guide: Injecting the Driver
Standard Windows Server 2022 installation media does not include the S100i driver. Without it, the installer will not see your RAID logical volumes. Method 1: Assisted Installation (Recommended)
Use HPE Intelligent Provisioning. This tool automatically injects all necessary drivers, including the S100i RAID driver , during the OS setup process. Method 2: Manual Driver Injection
HPE Smart Array S100i SR Gen10 SW RAID driver for Windows Server 2022
a critical software-based storage component that enables RAID functionality on entry-level HPE ProLiant Gen10 servers
. Because this is a "Software RAID" (driver-based) solution, the operating system cannot natively see logical volumes without this specific driver during installation. Hewlett Packard Enterprise Key Driver Details Latest Version
: 1010.14.0.0(C) (released Sept 28, 2022) is the primary recommended version for Windows Server 2022.
: Enables RAID 0, 1, 5, and 10 on up to 8 SATA drives connected to embedded system board ports. Operating System Support
: Specifically updated to support Windows Server 2022 features, including Secured-core
for enhanced malware protection on Intel® Xeon® processors. Hewlett Packard Enterprise Installation & Deployment
Since the driver is not included in standard Microsoft installation media, you must provide it during the OS setup process: Hewlett Packard Enterprise Manual Injection : Download the driver from the HPE Support Center , extract it to a USB drive, and select "Load Driver"
when prompted for a destination disk during Windows installation. Assisted Installation HPE Intelligent Provisioning
to automatically inject the necessary drivers during the OS deployment. Service Packs : The driver is also included in the Gen10 Service Pack for ProLiant (SPP)
, which provides a "fully qualified recipe" of firmware and drivers to ensure system stability. Hewlett Packard Enterprise Important Limitations Windows Only
The HPE Smart Array S100i SR Gen10 SW RAID is fully supported on Windows Server 2022. Because this is a software-based (driver-based) RAID solution, the device driver is not included in the standard Microsoft Windows installation media; you must manually provide it during the OS installation process for the installer to recognize your logical volumes. Key Driver Information
Latest Driver Version: 1010.14.0.0(C) (or newer) is the specific version released to support Windows Server 2022.
Official Source: You can download the verified driver directly from the HPE Support Center.
Required Action: A system reboot is required after installation for the updates to take effect and maintain hardware stability. How to Install During Windows Setup
If you are installing Windows Server 2022 onto a drive managed by the S100i, follow these steps:
Extract the Driver: Download the .exe driver package from HPE and extract the contents (using a tool like 7-Zip) to a USB flash drive.
Load Driver: During the "Where do you want to install Windows?" screen, click Load Driver.
Browse: Insert your USB drive, browse to the folder where you extracted the files, and select the appropriate driver file.
Alternative (Assisted): Use HPE Intelligent Provisioning to automate the OS installation; this method automatically injects the necessary S100i drivers for you. S100i SR Gen10 Features RAID Levels: Supports RAID 0, 1, 5, and 10.
Capacity: Manages up to 14 SATA drives connected to the system board's embedded SATA ports.
Limitation: This "S-class" controller is strictly supported on Windows only; it does not support Linux or VMware in RAID mode (these OSs must use AHCI mode).
If you're having trouble with the drives appearing even after loading the driver, let me know your server model (e.g., DL360 Gen10) and whether you've already configured the RAID array in the UEFI System Utilities.
In the world of enterprise server management, few tasks are as simultaneously critical and frustrating as storage driver management. For IT administrators deploying Microsoft’s robust Windows Server 2022 on HPE ProLiant Gen10 servers, one specific component often becomes a focal point of installation challenges: the HPE Smart Array S100i SR Gen10 SW RAID Driver.
The S100i is a software-based RAID controller embedded into the HPE ProLiant Gen10 server line. Unlike its hardware-based siblings (like the P408i or E208i), the S100i relies on the host CPU and the proper operating system driver to create and manage RAID arrays (0, 1, 5, and 10). Without the correct driver, Windows Server 2022 will not detect any logical drives during installation, leaving you staring at a blank storage selection screen. References:
This article provides an exhaustive deep dive into what the S100i driver is, why Windows Server 2022 specifically requires careful attention, where to download the correct binary, how to install it using various methods, and how to troubleshoot common pitfalls.
The HPE Smart Array S100i SR Gen10 requires a dedicated driver for Windows Server 2022 due to its software RAID nature. By pre-loading the driver during OS installation or adding it post-deployment, administrators can fully utilize RAID 0, 1, 5, and 10 on entry-level HPE ProLiant Gen10 servers.
Always download the latest driver from HPE Support (search for your specific server model) to ensure compatibility and stability with Windows Server 2022 updates and HPE management tools.
HPE Smart Array S100i SR Gen10 SW RAID is an entry-level software RAID solution that supports Windows Server 2022 through specific driver versions. Hewlett Packard Enterprise Essential Documentation
For comprehensive technical details and step-by-step setup, refer to these primary HPE resources: HPE Smart Array S100i SR Gen10 QuickSpecs
: Provides the official overview of supported features, including RAID levels 0, 1, 5, and 10 for up to 14 SATA drives. HPE Smart Array SR Gen10 User Guide
: Detailed technical manual covering configuration, management via HPE Smart Storage Administrator (SSA), and troubleshooting. Hitachi Global Driver & Installation Requirements
To use this controller with Windows Server 2022, ensure you meet the following criteria: Driver Version : Use version 1010.14.0.0(C)
or later, which explicitly adds support for Windows Server 2022. You can download it directly from the HPE Support Center : The S100i controller requires the system to be in UEFI Boot Mode ; it is not supported in Legacy BIOS mode. SATA Configuration : The embedded SATA ports must be set to Smart Array SW RAID Support in the UEFI System Utilities ( Storage Options SATA Controller Options Installation Tip
: If you are installing Windows Server 2022 from scratch, you must manually inject the driver
during the "Where do you want to install Windows?" step for the logical drives to appear. Hewlett Packard Enterprise Key Performance & Support Considerations Software-Based
: As a "S-class" controller, RAID calculations are performed by the system CPU rather than dedicated hardware. RAID Limitation
: It is a "RAID-only" controller, meaning physical drives are masked from the OS and can only be seen once a logical volume is created. OS Compatibility
The HPE Smart Array S100i SR Gen10 SW RAID is an embedded, driver-based SATA RAID solution for HPE ProLiant Gen10 servers. While originally designed for older Windows versions, it is fully supported on Windows Server 2022 through specific driver releases. Critical Driver Information
To ensure Windows Server 2022 recognizes your RAID volumes during or after installation, you must use the correct driver version.
Recommended Version: 1010.14.0.0(C) (or later) is the dedicated release for Windows Server 2022.
Alternative Support: Older versions like 106.12.6.0(D), primarily for Server 2019, have also been reported to load successfully on Server 2022.
Official Download: You can find the latest package on the HPE Support Center. Technical Capabilities & Limitations
The S100i is a "Software RAID" (S-class) controller, meaning it relies on the server's CPU to manage RAID logic.
The HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2022 is a critical software-based RAID driver required for Windows to recognize logical drives managed by the embedded S100i controller on HPE ProLiant Gen10 servers. Download Information Latest Driver Version: 1010.14.0.0(C). Release Date: September 28, 2022.
Official Support Page: HPE Support Center - S100i Driver for Windows Server 2022.
Alternative Support: For Gen10 Plus systems, use the HPE Smart Storage SR100i Gen10 Plus SW RAID Driver. Important Prerequisites
Driver Exclusion: This driver is not included in the standard Microsoft Windows OS media.
RAID Configuration: You must first create your RAID array (RAID 0, 1, 5, or 10) in the UEFI System Utilities (F9) or HPE Smart Storage Administrator (F10) before starting the OS installation.
UEFI Mode: The S100i controller requires the server to be in UEFI Boot Mode; it does not support Legacy BIOS mode. Installation Methods 1. Assisted Installation (Recommended)
Use HPE Intelligent Provisioning (press F10 during boot). This method automatically injects the necessary S100i drivers into the Windows Server 2022 installation process, so no manual driver loading is required. 2. Manual Injection (During Windows Setup) If you are installing Windows directly from a USB or ISO:
The HPE Smart Array S100i SR Gen10 SW RAID is a driver-based storage solution for HPE ProLiant Gen10 servers. It supports RAID levels 0, 1, 5, and 10 for up to 14 SATA drives. Because it is a software RAID, its driver is not included in standard Windows Server 2022 installation media; you must manually provide it during setup for Windows to "see" your logical drives. 1. Official Driver Download
HPE provides a specific version of this driver for Windows Server 2022. Version: 1010.14.0.0(C) Release Date: September 28, 2022
Direct Source: Download the HPE Smart Array S100i SR Gen10 SW RAID Driver from the HPE Support Center. 2. Pre-Installation Configuration The official driver for the HPE Smart Array
Before installing the OS, the controller must be set to RAID mode and an array must be created.
Enable RAID Mode: During POST, press F9 to enter UEFI System Utilities. Navigate to System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options > Embedded SATA Configuration and select Smart Array SW RAID Support.
Create Array: Enter the HPE Smart Storage Administrator (SSA) (usually via F10 Intelligent Provisioning or F9 System Configuration) to create your RAID volume. 3. OS Installation Steps
If you are not using HPE Intelligent Provisioning (which automatically injects drivers), follow these manual steps:
Extract the Driver: Download the .exe driver file. Run it on another PC and select the option to Extract the files to a USB flash drive. Load Driver During Setup: Boot from the Windows Server 2022 media.
When the "Where do you want to install Windows?" screen appears (and no disks are listed), click Load driver.
Browse to the folder on your USB drive where you extracted the driver files.
Select the HPE Smart Array S100i SR Gen10 SW RAID driver. Once loaded, your RAID logical drive should appear in the list. 4. Key Specifications
Compatibility: Exclusively for Windows environments; Linux and VMware require different configurations or are not supported in SW RAID mode. Interface: 6Gb/s SATA.
CPU Impact: As a software RAID, it utilizes system CPU for RAID calculations, though performance tests on Windows Server 2022 show minimal CPU load differences between entry-level and high-end processors.
HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2022
Introduction
Hewlett Packard Enterprise (HPE) Smart Array S100i SR Gen10 is a software-based RAID (Redundant Array of Independent Disks) solution designed for HPE ProLiant Gen10 servers. The S100i SR Gen10 is a key component of HPE's storage strategy, providing a flexible and cost-effective way to configure and manage storage on ProLiant servers. In this paper, we will focus on the S100i SR Gen10 software RAID driver for Windows Server 2022, highlighting its features, benefits, and installation process.
Overview of HPE Smart Array S100i SR Gen10
The HPE Smart Array S100i SR Gen10 is a software-based RAID solution that leverages the capabilities of the server's CPU and memory to provide RAID functionality. This approach eliminates the need for a dedicated hardware RAID controller, reducing costs and increasing flexibility. The S100i SR Gen10 supports a wide range of RAID configurations, including RAID 0, 1, 5, 6, 10, 50, and 60.
Features of HPE Smart Array S100i SR Gen10
The S100i SR Gen10 offers several key features that make it an attractive option for Windows Server 2022 deployments:
Benefits of HPE Smart Array S100i SR Gen10
The S100i SR Gen10 offers several benefits for Windows Server 2022 deployments:
HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2022
The HPE Smart Array S100i SR Gen10 software RAID driver for Windows Server 2022 is designed to provide seamless integration with the operating system. The driver allows administrators to manage RAID configurations and monitor disk health from within Windows Server 2022.
Installation Process
Installing the HPE Smart Array S100i SR Gen10 software RAID driver on Windows Server 2022 is a straightforward process:
Conclusion
The HPE Smart Array S100i SR Gen10 software RAID driver for Windows Server 2022 provides a flexible and cost-effective way to configure and manage storage on ProLiant Gen10 servers. With its software-based approach, flexible RAID configurations, and support for multiple disk types, the S100i SR Gen10 is an attractive option for organizations looking to implement RAID on their Windows Server 2022 deployments.
References
Appendix
The following table provides a summary of the key features and benefits of the HPE Smart Array S100i SR Gen10 software RAID driver for Windows Server 2022:
| Feature | Benefit | | --- | --- | | Software-based RAID | Cost-effective, flexible RAID configurations | | Flexible RAID configurations | Supports a wide range of RAID configurations | | Support for multiple disk types | Supports SAS, SATA, and NVMe disk types | | HPE Smart Array software | Simple and intuitive interface for managing RAID configurations |
Enable iLO 5’s Agentless Management Service (AMS). It will report S100i array failures through iLO Health Summary without needing a separate OS agent.
