Gorenje Pf Error Better May 2026

On the control board, a power relay can develop carbon pitting over time. This causes intermittent connection.
Advanced better fix: Desolder the relay, open it, and clean contacts with fine sandpaper, or replace the relay (part number G2R-1-E-T130). Only for experienced electronics hobbyists.

Three recovery options for the user:

| Option | Description | |--------|-------------| | Resume | Continue program from point of interruption (if safe) | | Restart | Start same program from beginning | | Cancel | Clear PF error and turn off appliance |

⚠️ Resume not available for heating/drying cycles above 60°C due to safety.

Word count: ~1,800
Reading time: 7 minutes gorenje pf error better

If you own a Gorenje washing machine, the sudden appearance of "PF" on the digital display can be frustrating. The machine stops mid-cycle, the door may stay locked, and you’re left wondering: Should I call a technician? Is the control board dead? Do I need a new machine?

Stop right there.

The Gorenje PF error is actually one of the most common — and often easiest — faults to resolve. But the way most people approach it leads to wasted time, unnecessary repair costs, or even permanent damage.

This guide is called "Gorenje PF error better" for a reason. Here, you’ll learn the correct, safer, and more effective way to diagnose and fix the PF error on your Gorenje washing machine — better than the guesswork you’ll find on random forums. On the control board, a power relay can

Wait — what does the drain pump have to do with a power failure error?

Everything.
A clogged filter forces the pump to run longer and harder. This increases current draw. On sensitive Gorenje models, the control board interprets a voltage sag (due to overcurrent) as a PF error, not a pump error.

How to do it better:

This simple step eliminates the PF error in ~20% of cases where no power issue actually exists. Three recovery options for the user: | Option

| Approach | Cost | Time | Success Rate | Risk | |----------|------|------|--------------|------| | Factory reset only | Free | 2 min | 30% | Low | | Call technician | $80–150 | 2–5 days | 90% | Medium (unnecessary cost) | | Replace main board | $150–300 | 1–2 hrs | 70% | High (often misdiagnosed) | | Gorenje PF error better | $0–20 | 20–40 min | 95% | Very low |

The better method prioritizes external and simple internal causes first, which is precisely what Gorenje’s own service manuals recommend — but rarely share with end users.

PF = Power Failure (or in some service manuals, “Power Fluctuation”).

Unlike an F-series error (e.g., F1, F5, E7), PF does not indicate a broken part inside the machine. Instead, it means:

The electronic control unit (ECU) has detected that its internal supply voltage dropped below the minimum operating level for more than 50 milliseconds, then returned.

In simple terms: your washing machine briefly lost power mid-cycle, then regained it.