The FANUC Series Oi-TF Plus Programming Manual is a dense but essential technical document. Its strength lies in the combination of traditional G-code (ISO) with high-level Macro B and conversational programming. For an engineer or machinist, mastering this manual means unlocking the full potential of modern CNC lathes—from simple 2-axis turning to complex multi-cycle operations with live tooling and macro automation.

Key takeaway: Do not read linearly. Use the manual as a reference. The fastest path to proficiency is to write short test programs for each cycle type (roughing, threading, macro) and simulate or run them in single-block mode.

This report is based on public documentation and standard practices for FANUC Oi-TF Plus. For exact syntax, always refer to the official B-64694EN manual and your machine builder’s supplement.

For the FANUC Series 0i-F Plus, the "Programming Manual" content is typically integrated into the Operator's Manual

, which is split by machine type. Depending on whether you are working with a lathe or a machining center, you will need one of the following primary manuals:  Primary Manuals for Series 0i-F Plus 

Lathe System (T series): Referred to as 0i-TF Plus. Use the Operator's Manual (B-64694EN-1) for specific turning programming and operations.

Machining Center System (M series): Referred to as 0i-MF Plus. Use the Operator's Manual (B-64694EN-2) for milling and multi-axis programming.

General Operator's Manual: For features common to both lathe and machining center systems, refer to B-64694EN.  Key Programming Content Included 

These manuals cover the standard ISO G-code and M-code programming required to operate the control: 

Preparatory Functions (G-codes): Includes interpolation (G01, G02, G03), coordinate system setting, and polar coordinate commands (G15, G16).

Feed Functions: Details for constant surface speed control and various feed rate overrides.

Programming Simplification: Instructions for canned cycles, subprograms, and macro variables stored in non-volatile memory.

MANUAL GUIDE i: The "Plus" series often utilizes MANUAL GUIDE i, which allows for conversational, graphical programming without needing deep G-code knowledge.  Advanced Programming Supplements 

If you are performing specialized development beyond standard G-code, these dedicated manuals are necessary:  CNC Series 0i-F Plus

The FANUC Series 0i-TF Plus Programming Manual (B-64694EN) is a comprehensive resource for operating and programming FANUC's latest mid-range CNC lathe controls. It details G-code/M-code programming, canned cycles, and tool management, while highlighting new features like the iHMI interface and Fine Surface Technology for enhanced precision. For detailed parameter information, review the Fryer Machine Fanuc Series 0i-MODEL F Plus Parameter Manual Fryer Machine Systems FANUC Series 0i-MODEL F Plus PARAMETER MANUAL

The FANUC Series 0i-TF Plus Programming Manual (often documented under series B-64694) is the definitive technical guide for operating and programming FANUC’s latest generation of lathe-specific CNC controls. This "Plus" edition integrates modern hardware with legacy reliability, featuring the iHMI (intelligent Human Machine Interface) for a more intuitive, icon-driven user experience. Core Programming Architecture

The manual details two primary methods for creating machining programs:

G-Code Programming (ISO Standard): Supports traditional NC programming with expanded capabilities like up to 400 look-ahead blocks for high-speed processing.

Conversational Programming (MANUAL GUIDE i): An icon-driven interface that allows operators to build complex programs without deep G-code knowledge. It features a "Fixed Form Sentence" function to quickly insert standard startup or shutdown code blocks. Key Technical Features

The 0i-TF Plus introduces several advanced control technologies documented in the manual: FANUC Series 0i-F Plus - CNC

Master the FANUC Series 0i-TF Plus: Programming & Best Practices FANUC Series 0i-TF Plus

is the current industry standard for high-performance turning centers. Whether you are a seasoned machinist or just starting with CNC lathe operations, understanding the nuances of this control system is key to reducing cycle times and improving surface finish.

This guide breaks down the essential programming elements from the official manuals to help you master the 0i-TF Plus. 1. Traditional G-Code vs. MANUAL GUIDE i

The 0i-TF Plus offers two distinct paths for creating part programs: Traditional G-Code: Reliable and precise for complex, fine-tuned toolpaths. MANUAL GUIDE i:

A conversational programming interface that uses icons and pre-set macros. It allows you to create programs through a visual dialogue rather than typing every block of code manually, which is ideal for speeding up the setup for standard parts. 2. Setting Up Your Program

To begin any new program on the 0i-TF Plus, you must first enter

Fanuc Oi TF Plus - Manual Guide i Training Basic Part Program

The FANUC Series 0i-TF Plus is an advanced CNC control system specifically designed for lathe (turning) operations. Programming this system generally involves two main methods: traditional ISO G-code for manual control and Manual Guide i for conversational, shop-floor programming. Core Programming Methods

ISO G-code Programming: This is the standard foundation for all FANUC systems. It uses preparatory functions (G-functions) and auxiliary functions (M-codes) to define machine movements and operations.

Manual Guide i (Conversational): A user-friendly interface that allows operators to create programs by selecting machining cycles (e.g., turning, grooving, threading) via icons. It automatically generates the underlying G-code and includes built-in Tool Calibration and simulation features. Essential Manuals and Documentation

Comprehensive programming requires consulting several official FANUC manuals. Detailed versions like the Series 0i-MODEL F Plus Descriptions provide foundational specifications. FANUC Series 0i-MODEL F Plus PARAMETER MANUAL

Here’s a short descriptive piece for the FANUC Series Oi-TF Plus Programming Manual, suitable for a catalog, training introduction, or technical reference summary:

FANUC Series Oi-TF Plus Programming Manual

The FANUC Series Oi-TF Plus Programming Manual is the essential reference guide for operators, programmers, and setup technicians working with FANUC’s widely adopted Oi-TF Plus CNC control. Built on FANUC’s proven reliability, this manual provides comprehensive, step-by-step instruction for creating, editing, and optimizing CNC programs in turning applications.

Inside, you’ll find detailed coverage of:

Designed for clarity, each programming example includes purpose, syntax, and expected machine behavior — helping users move from basic part programming to advanced multi-tool operations with confidence. The manual also integrates with FANUC’s iHMI and data server features, supporting modern shop floor connectivity and program management.

Whether you’re training new programmers or supporting daily production, the Oi-TF Plus Programming Manual is your authoritative source for unlocking the full capability of FANUC’s flagship turning control.

Would you like a shorter blurb (e.g., for a back cover) or a table of contents outline based on the actual FANUC manual structure?

The FANUC Series 0i-TF Plus is a highly advanced CNC (Computer Numerical Control) system designed specifically for turning centers (lathes). The Programming Manual associated with this system is the definitive guide for CNC programmers, setup personnel, and maintenance engineers. It documents the G-code architecture, operational logic, and advanced programming features required to maximize the capabilities of the machine tool.

Unlike basic operator guides, the Programming Manual focuses on the creation and modification of part programs, detailing how the CNC interprets code to control axis motion, spindle speed, tool turrets, and peripheral devices.

This section serves as the dictionary of the control system. It covers:

A common crash occurs due to improper reference return logic. The manual details G28 U0 W0 (return via intermediate point). The TF Plus manual adds warnings about the High-speed positioning parameters that differ from older units.

The first section is not about writing code; it is about thinking in code. It covers:

Fanuc controls are "no-decimal-point" sensitive. If you type X10, the control sees 0.0001 inches (or 0.001mm). You must type X10.0. The manual contains a bold warning box on this exact error, which is a leading cause of scrapped parts.

These codes control the motion of the tool.

| Code | Group | Description | | :--- | :--- | :--- | | G00 | 01 | Rapid Traverse. Moves the tool at maximum speed (non-cutting). | | G01 | 01 | Linear Interpolation. Cutting feed in a straight line. | | G02 | 01 | Circular Interpolation CW. Cutting arc (Clockwise). | | G03 | 01 | Circular Interpolation CCW. Cutting arc (Counter-Clockwise). | | G32 | 01 | Threading. Used for straight/taper threading. | | G28 | 00 | Reference Point Return. G28 U0 W0 sends turret home. | | G40 | 07 | Cutter Compensation Cancel. | | G41 | 07 | Cutter Compensation Left. | | G42 | 07 | Cutter Compensation Right. | | G50 | 00 | Coordinate System Setting / Max RPM Clamp. | | G96 | 02 | Constant Surface Speed (CSS). Maintains surface speed as diameter changes. | | G97 | 02 | Constant RPM. Revolutions Per Minute mode. |