| Parameter | Description | | :--------- | :------------------------------ | | P0000 | Number of axes | | P0001 | Spindle settings (e.g., number of spindles, spindle type) | | P0002 | Feed rate settings (e.g., rapid traverse rate, cutting feed rate) |
Control cutting feed rates and clamping.
| Parameter # | Description |
| :--- | :--- |
| 0520 | Maximum Cutting Feedrate.
Clamps the maximum feed rate during G01, G02, G03 moves. |
| 0521 | Minimum Cutting Feedrate. |
| 0522 | Manual (JOG) Feedrate Maximum.
Limits how fast the machine moves in JOG mode. |
| 0523 | Manual Rapid Override. | fanuc 11m parameter list
(These examples are illustrative—match to your control’s exact P-numbers.)
Soft limit setup:
Home (datum) offset:
Servo gain selection:
Spindle encoder scaling:
| Param | Description | Typical Value / Bits | |-------|-------------|----------------------| | 0000 | Option bits (mirror image, DNC, etc.) | Binary (bit mask) | | 0001 | RS-232 / baud rate | e.g., 4800, 9600 bps | | 0012 | Axis assignment & rotation direction | Bits 0–5 | | 0100 | Servo motor type / pulse coder | 101–255 (machine specific) | | 0200 | Inch/Metric selection | 0 = mm, 1 = inch | | 0220 | G-code system A/B/C | 0, 1, or 2 | | 0300 | Positioning check width (µm) | 10–200 | | 0500 | Spindle max speed (RPM) | e.g., 6000 | | 0510 | Gear ratio (spindle to encoder) | 100–32767 | | 0700 | Work coordinate system presets | 0 = G92, 1 = G54+ | | 8000.0 | Parameter Write Enable (PWE) | 0 = locked, 1 = unlocked | | Parameter | Description | | :--------- |
⚠️ Warning: Incorrect parameters can crash machine or cause servo errors. Always backup all parameters first.