This is where many users fail. You must connect the device correctly:
While this article focuses on Windows 10, the same driver works on Windows 11 64-bit. However, Windows 11 has stricter signature enforcement. You must disable Memory Integrity (Core Isolation) in Windows Security > Device Security > Core Isolation > turn off Memory Integrity, then reboot before installing the Amlogic driver.
Now that the driver is active:
Even with the correct driver, issues arise. Here are the top fixes:
This procedure assumes you are using an English version of Windows 10 Pro or Home (64-bit). Admin rights are required.
Cause: Windows 10’s driver signature enforcement blocked the driver.
Fix: Re-disable enforcement using the Shift + Restart method. Also, check your USB cable—many cheap cables are charge-only. Use a short (under 3 feet) data-sync cable.
If you own an Android TV box, a development board (like the Odroid-N2), or a generic streaming stick powered by an Amlogic chipset (S905, S912, S922X, etc.), you have probably encountered the need to flash firmware, unbrick a device, or perform a low-level format. To communicate with your PC, you need one critical piece of software: the Amlogic USB Driver for Windows 10 (64-bit).
Without this driver, your computer will not recognize the device when it is in "Burn Mode" or "Mask ROM Mode." Windows might show an error like “USB device not recognized” or label it as an “Unknown Device.” This guide will walk you through everything you need—from downloading safe drivers to troubleshooting installation failures on modern 64-bit versions of Windows 10 and Windows 11.
Installing the Amlogic USB VCOM driver on Windows 10 64-bit enables communication and firmware flashing for Amlogic-based devices. Follow the driver install steps, ensure the device is in the correct mode, and take care when flashing firmware.
Related search suggestions have been prepared.
Guide: Installing Amlogic USB Driver on Windows 10 64-bit
Introduction
Amlogic is a popular System-on-Chip (SoC) manufacturer for Android devices, smart TVs, and other embedded systems. If you're a developer or user who needs to connect an Amlogic-based device to your Windows 10 64-bit system via USB, you'll need to install the Amlogic USB driver. This guide will walk you through the process of installing the Amlogic USB driver on Windows 10 64-bit.
Prerequisites
Step 1: Enable Developer Options on Your Amlogic Device
Step 2: Enable USB Debugging on Your Amlogic Device
Step 3: Download and Install the Amlogic USB Driver
C:\Amlogic_Driver).Step 4: Connect Your Amlogic Device to Your Windows 10 System
Step 5: Install the Amlogic USB Driver on Windows 10
C:\Amlogic_Driver).android_usb.inf file (or a similar file with a .inf extension).Step 6: Verify the Amlogic USB Driver Installation
Troubleshooting
Conclusion
To install the Amlogic USB driver on Windows 10 (64-bit), the most reliable method is typically via the Amlogic USB Burning Tool, which bundles the necessary drivers. Method 1: Using the USB Burning Tool Installer
The easiest way to get the 64-bit drivers is to install the official Amlogic software.
Download and Install: When you install the Amlogic USB Burning Tool, the setup usually prompts you to install the "WorldCup Device" drivers .
Manual Execution: If the tool is already installed but the device isn't recognized, navigate to the tool's installation folder (usually C:\Program Files (x86)\Amlogic\USB_Burning_Tool\Driver). amlogic usb driver windows 10 64 bit
Run the 64-bit Installer: Look for a file named InstallDriver.exe or InstDrv64.exe and run it as an Administrator . Method 2: Manual Update via Device Manager
If your computer detects the device as "Unknown" or "WorldCup Device" with a yellow triangle:
Open Device Manager: Right-click the Start button and select Device Manager .
Locate Device: Find your Amlogic device (often under "Other devices" or "LibUSB-Win32 Devices").
Update Driver: Right-click it, select Update driver, and choose Browse my computer for drivers .
Point to Folder: Direct Windows to the Driver folder within your Amlogic USB Burning Tool installation directory . Troubleshooting Tips
Driver Signature Enforcement: Windows 10 64-bit sometimes blocks unsigned Amlogic drivers. If installation fails, you may need to restart Windows with Driver Signature Enforcement disabled via the Advanced Startup menu.
Connection: Always use a USB 2.0 port if possible, as USB 3.0/3.1 ports can occasionally cause detection issues with Amlogic burning mode.
Are you having trouble getting a specific TV Box or Single Board Computer into "Burning Mode"?
The Amlogic USB Burning Tool Driver is a fundamental utility for anyone looking to manually flash or recover Android TV boxes powered by Amlogic chipsets on Windows 10 64-bit. While usually reliable when bundled with the Amlogic USB Burning Tool, users often encounter specific quirks during installation and device recognition. Key Features & Performance
Broad Device Recovery: Essential for unbricking devices, replacing damaged firmware, or repairing corrupted bootloaders.
Driver Versatility: The package typically includes "WorldCup" drivers or the CP210x USB to UART Bridge driver, necessary for the PC to communicate with the TV box in "update mode".
Flexible Installation: Supports multiple installation paths, including direct execution of "install driver.exe" or manual right-click installation of .inf files for Windows 10 users. Pros
All-in-One Solution: Most versions of the Amlogic USB Burning Tool (like v2.1.6 or newer) come with these drivers embedded, simplifying the setup process.
High Success Rate for Recovery: When correctly recognized, it provides a faster and more stable flashing method compared to SD card updates.
64-Bit Optimization: Modern versions explicitly support Windows 10 64-bit architectures, ensuring better compatibility with newer hardware. Cons & Common Challenges
Detection Issues: A frequent "hiccup" is Windows 10 not recognizing the device. Users often need to try different USB ports, specifically the one closest to the DC power inlet, or avoid USB 3.0 ports which can be less stable for flashing.
Installation Warnings: Users may see a "Windows protected your PC" warning due to unsigned drivers; this requires manually allowing the operation to proceed.
Manual Cleanups: If drivers fail to install, users sometimes have to manually uninstall "Unknown Devices" or "WorldCup" entries in Device Manager and registry before a clean reinstall will work. User Experience Tips Amlogic Driver Installation
The clock on Alex’s monitor read 2:47 AM. On his bench sat a fragile, beautiful thing: a bare Amlogic A311D development board, its golden pins glinting under the desk lamp. It was the brain of his passion project—a retro game console he was building from scratch.
But the brain was silent. Catatonic.
Alex had spent the last three hours wrestling with Windows 10. Every time he plugged the USB cable from the board to his high-end PC, the system would blurt out a sharp, dismissive DING-DONG. Then, a notification: “USB device not recognized. The last USB device you connected to this computer malfunctioned.”
“We’re not malfunctioning,” Alex muttered, stroking the heat sink on the Amlogic chip. “You’re just being ignorant.”
He had the right file: amlogic_usb_burn_tool_v2.2.4.exe. He’d disabled driver signature enforcement. He’d even sacrificed a chicken nugget to the ghost of Bill Gates. Nothing worked. In Device Manager, the board appeared only for a haunting second as “WorldCup Device” before vanishing into the yellow-triangle graveyard of failed drivers.
Frustration turned into a quiet, desperate focus. He navigated to the hidden menu: Action > Add legacy hardware > Install from disk. He pointed Windows to the raw .inf file he had extracted from the SDK.
The system hesitated. A gray box appeared: “Would you like to install this device software? A driver without a digital signature will not be installed on Windows 10 64-bit.” This is where many users fail
“Override,” Alex whispered, clicking the check-box he’d previously exposed via the Advanced Startup menu.
Click.
For one second, nothing happened. Then, a different sound. Not the error chime, but a low, three-note rising chord—the sound of a device mounting successfully. The screen flickered.
In Device Manager, under “Universal Serial Bus devices,” a new line appeared: Amlogix USB Download Gadget.
Alex held his breath. Then, the little green LED on the development board, the one that had been dark for hours, began to pulse. Steady. Rhythmic. Alive.
He opened the USB Burn Tool. The empty box for “HUB 1 – Port 1” suddenly populated with a line of black text: [15:07:22] HUB1-1: Device Connect.
He didn’t cheer. He just leaned back, exhaling a long, shaky breath. The machine wasn't just a collection of code and copper anymore. For that one silent moment, in the dark of his workshop, Alex felt like a locksmith who had just heard the final pin fall into place, opening a door to a world no one else could see.
Amlogic USB Driver for Windows 10 64-bit: A Comprehensive Review
The Amlogic USB driver is a crucial software component that enables communication between Amlogic-based devices and Windows 10 64-bit operating systems. In this review, we will assess the driver's performance, features, and overall user experience.
Key Features:
Performance:
The Amlogic USB driver's performance is satisfactory, with most users reporting successful connections and data transfers. However, some users have reported occasional disconnections or difficulties in establishing a connection.
Pros:
Cons:
Conclusion:
The Amlogic USB driver for Windows 10 64-bit is a reliable and easy-to-use solution for users who want to connect their Amlogic-based devices to their computers. While it may have some occasional issues, the driver's performance is generally satisfactory, and its wide compatibility and simple installation make it a popular choice among users.
Rating: 4/5
Recommendation:
If you are an Amlogic device user with a Windows 10 64-bit system, the Amlogic USB driver is a good option to consider. However, if you experience any issues with the driver, you may want to explore alternative solutions or contact the manufacturer's support team for assistance.
Download Link:
You can download the Amlogic USB driver for Windows 10 64-bit from the official Amlogic website or other reputable sources. Ensure that you download the driver from a trusted source to avoid any potential security risks.
For Amlogic devices, you usually don't download a standalone driver. Instead, the necessary World Cup Device drivers are bundled with the Amlogic USB Burning Tool. Recommended Download & Installation
Download the Tool: Most users find the Amlogic USB Burning Tool v2.1.6.8 to be stable for Windows 10. You can also find various versions like v3.x for newer Android 11+ devices on community sites like 4PDA.
Run as Administrator: Right-click the installer and select Run as Administrator.
Automatic Driver Install: During the setup, the installer will prompt you to install the Amlogic World Cup Driver. Make sure to click Next or Install when this pop-up appears. Verify in Device Manager:
Connect your device via a USB male-to-male cable while holding the "Reset" button. Step 1: Enable Developer Options on Your Amlogic Device
Open Device Manager. Under Universal Serial Bus controllers, you should see World Cup Device. Manual Driver Installation
If the device is still not recognized, you can manually point Windows to the driver folder: Open Device Manager and find the "Unknown Device." Right-click it and select Update driver. Choose Browse my computer for drivers.
Navigate to the installation directory, typically C:\Amlogic\Aml_Burn_Tool\V3\Driver or similar, and click OK. Troubleshooting Tips
USB Port: Use a USB 2.0 port on your PC if possible, as USB 3.0 ports sometimes fail to recognize the bootloader mode.
Cable: Ensure you are using a high-quality USB male-to-male cable.
Clean Reinstall: If you have "Unknown Device" errors, uninstall the current drivers and the tool, then reboot before trying again.
Are you trying to flash a specific firmware image (.img) to a TV box, or are you just trying to get the computer to recognize the device for ADB/development? Amlogic USB Burning Tool - 4PDA
The air in the workshop was thick with the scent of solder and old coffee. Elias adjusted his glasses, his eyes stinging from hours of staring at the flickering monitor. On the desk lay the "Black Box"—a generic Android TV box powered by an Amlogic S905X3 chipset that had stubbornly refused to boot since a failed firmware flash the night before. "Come on, talk to me," Elias muttered.
He had the Amlogic Burn Card Maker ready, and the new image file was loaded. All he needed was a handshake between the device and his PC. He plugged the male-to-male USB cable into the box's OTG port while holding down the reset button with a toothpick.
Nothing. Windows 10 remained silent. No "device connected" chime. No sign of life in the Device Manager.
He knew the culprit: the driver. Windows 10 64-bit was notoriously picky about unsigned drivers. He dove back into the digital trenches, scouring forums where users spoke in hex codes and cryptic links. He finally found it—a zip file buried in a thread from 2022 titled Amlogic_USB_Driver_v1.6.30.
He downloaded the archive and extracted the contents. Inside was the WorldCup_Device driver. He right-clicked the .inf file and hit Install, but Windows blocked it with a cold, grey notification: The third-party INF does not contain digital signature information.
Elias smirked. He wasn't giving up that easily. He rebooted his PC into Disable Driver Signature Enforcement mode. The screen glowed an eerie blue as he navigated the advanced startup menus.
Once back at his desktop, he tried again. This time, a warning appeared—red and urgent—asking if he wanted to install the unverified driver anyway. He clicked Yes.
The progress bar crawled across the screen. Installation Successful.
With bated breath, Elias grabbed the USB cable again. Toothpick in the reset hole, cable into the port. Ding-ding.
The Device Manager refreshed, and there it was, nestled under "Libusb-win32 devices": WorldCup Device.
On his second monitor, the Amlogic Customization Tool turned a bright, hopeful green. The "Connect Success" message felt like a victory lap. He hit Start, and the progress bar began its slow march from 0% to 100%. The Black Box was breathing again.
Installing the Amlogic USB driver on Windows 10 (64-bit) is a critical step for anyone looking to unbrick, upgrade, or flash custom firmware onto Android TV boxes using the Amlogic SoC. Without this driver, your PC will not communicate with your device in "Burning Mode." 1. Download the Necessary Tools
The Amlogic USB driver is rarely a standalone download; it is typically bundled with the Amlogic USB Burning Tool.
Amlogic USB Burning Tool (v3.2.0 or v2.1.7.0): These versions are widely used and include the necessary driver installers in their installation directories.
Driver Files: Once you extract or install the tool, the drivers are often located in a subfolder named Driver within the installation path (e.g., C:\Amlogic\Aml_Burn_Tool\Driver). 2. Automatic Installation Method
The easiest way to install the drivers is during the setup of the USB Burning Tool itself.
Run the USB_Burning_Tool.exe (or setup file) as an Administrator.
Follow the prompts. Towards the end of the installation, a separate window will pop up specifically for Device Driver Installation.
Click Next and then Finish to allow Windows to register the Amlogic drivers. 3. Manual Installation (For Windows 10 64-bit)
If the tool doesn't recognize your device, you may need to force the driver installation manually via the Device Manager. Amlogic USB Burning Tool - 4PDA
Installing the Amlogic USB Driver on Windows 10 (64-bit) is essential for flashing firmware or unbricking Android TV boxes. These drivers are typically bundled with the Amlogic USB Burning Tool , which automates most of the installation process. Installation Procedure Amlogic USB Burning Tool - 4PDA
