While the software resets the electronic counter, it does not physically clean or replace the waste ink pads inside your printer.
If you want, I can:
The Epson Stylus Photo 1390 is a legendary A3+ printer, but it is programmed to stop functioning once its internal "Waste Ink Counters" reach a specific limit. To keep the hardware running, users utilize a specialized utility known as the Adjustment Program (or Resetter). 🛠️ What is the Epson 1390 Adjustment Program?
The Adjustment Program is a maintenance software used by technicians to communicate with the printer's firmware. Its primary purpose is to perform "service" tasks that are not available in the standard print driver.
Service Requirement: Modern printers use internal sponges (waste ink pads) to catch excess ink during cleaning cycles.
Safety Lock: When the printer "thinks" these pads are full, it triggers a "Service Required" error (flashing red lights).
The Solution: The Resetter clears the digital counter back to 0%, allowing the printer to resume operation. đź“‹ Key Functions of the Utility
While most users only use it for the counter reset, the tool offers several deep-level maintenance options: Adjustment Program Epson 1390 Resetter
Waste Ink Pad Counter Reset: Clears the main pad and platen pad counters.
EEPROM Operations: Allows technicians to back up or restore the printer’s memory settings.
Initial Ink Charge: Forces a deep prime of the ink lines (useful after a long period of storage).
Head Cleaning: Performs a more powerful cleaning cycle than the standard Windows utility.
Print Head ID Input: Necessary if you replace the physical print head with a new one. ⚠️ Essential Safety Warning
Before you use a resetter, you must address the physical reality of the hardware:
Ink Overflow Risk: Resetting the software does not clean the physical sponges. If you reset the counter without cleaning or replacing the pads, ink will eventually leak out of the bottom of the printer. While the software resets the electronic counter, it
Hardware Check: It is highly recommended to install an External Waste Ink Tank (an "ink dump") before performing a reset. This redirects waste ink into a bottle for easy disposal.
Source Reliability: Be cautious when downloading these tools. Many "free" versions found online contain malware or viruses. Always scan the .exe file with updated antivirus software. 🚀 How to Use the Resetter (General Steps)
Connection: Connect the printer via USB cable (Wi-Fi or network resets often fail).
Selection: Open AdjProg.exe and click Select. Choose the "Stylus Photo 1390" model and the correct Port.
Maintenance: Click Particular Adjustment Mode and find Waste ink pad counter.
Check & Initialize: Click Check to see current levels. Select the checkboxes and click Initialization to wipe the memory. Reboot: Turn the printer off and back on when prompted.
If you'd like to proceed with maintenance, I can help you find: Tutorials for installing an external waste ink bottle. If you want, I can:
Troubleshooting steps if the "Service Required" light persists.
Compatibility checks for other Epson L-Series or Stylus models.
Are you currently seeing a specific error message or a flashing light pattern?
Like all inkjet printers, the Epson 1390 has a waste ink pad that absorbs ink during cleaning cycles. The printer is programmed to stop working after a certain number of prints to prevent ink from overflowing. The Adjustment Program resets this internal counter, allowing you to print again.
Common Errors it fixes:
If you own an Epson Stylus Photo 1390, you may have encountered the dreaded "Service Required" error message, accompanied by blinking red lights. This usually means the printer’s internal waste ink counter is full. The solution is simple: you need the Epson 1390 Adjustment Program.
This guide covers everything you need to know about the resetter, including how to download it, how to use it safely, and essential maintenance tips.