23km-c051-09v Datasheet Now

Q:Can I run the 23KM-C051-09V at 24V?
A: Only if used with a current-limiting chopper driver. The 09V rating means rated voltage for constant voltage drive (L/R drive). For chopper drives, you can use 24V but must set phase current to 0.51A max.

Q:Is this a servo motor?
A: No. The 23KM series are hybrid steppers. If you see encoder ports on the back, it might be a closed-loop stepper – still not a true AC servo.

Q:How do I test if my motor is the C051-09V variant?
A: Measure phase resistance. Should be ~17.6 ohms (0.51A version) or ~1.76 ohms (5.1A version). 9V ÷ 0.51A = 17.6 ohms. 23km-c051-09v datasheet

Q:Can I pair with a TB6600 driver?
A: Yes, but set DIP switches for 0.5A current and 1/8 microstep. Set input voltage to 9–12V only.

| Pin | Function | |-----|----------| | 1 | VCC (+9V DC) | | 2 | GND | Q:Can I run the 23KM-C051-09V at 24V

| Parameter | Specification | | :--- | :--- | | Rated Output Power | 200 W (0.2 kW) to 750 W (0.75 kW)* | | Rated Voltage | 3-Phase AC 200V - 230V | | Rated Current | Approx. 1.0 A - 4.5 A (depending on frame size) | | Rated Speed | 3000 rpm | | Maximum Speed | 6000 rpm | | Rated Torque | 0.64 N·m (for 200W class) | | Peak Torque | 200% of Rated Torque (approx. 1.28 N·m) | | Protection Class | IP65 (Standard for servo motors - Dust tight, water jet resistant) |

*The "23" in the part number often suggests a frame size related to 23-frame (approx 60mm or 90mm sq flange), which usually aligns with the 200W to 400W power range. | Pin | Function | |-----|----------| | 1

At rated 0.51 A/phase (both phases on), the 23KM-C051-09V surface temperature reaches ~65°C after 1 hour in free air (25°C ambient). Use aluminum heat spreaders or forced air if operating at 100% duty cycle above 40°C ambient.

A: Yes, but you must limit the current to 5.1A using a chopper driver. Running it directly at 12V (without a driver) would cause current of ~6.85A (12V / 1.75Ω), which will overheat and demagnetize the rotor.

The 23KM-C051-09V is a compact, high-efficiency AC servo motor designed for high-precision motion control applications. It is typically paired with a compatible servo amplifier (drive) to form a closed-loop control system. The "KM" designation usually indicates a specific brake or encoder configuration within the low-voltage (200V class) or high-frequency response family.

Search for "23KM" stepper motor datasheet first, then compare specs.